Body
1. Hold the key down while pressing the “R” key. A box will appear in the lower left corner. Type control and click OK. This will open the Control Panel
2. In Control Panel, verify Large Icons is selected in “View By “ field, (if not, select it from the dropdown menu), then select Network and Sharing Center.
3. In the Network and Sharing Center window, select “Setup a new connection or network”.
4. In the Setup a Connection or Network window, select “Manually connect to a wireless network” then click “Next”.
5. In the Manually Connect to a Wireless Network window populate the fields as shown below then click “Next”.
6. Select Change Connection Settings.
7. Verify settings as pictured below then click on the Security tab.
8. Verify settings as below and click the Settings button.
9. Uncheck the “Verify the server’s identity by validating the certificate” box.
10. Click OK at the bottom of the Protected EAP Properties window.
11. Click on the Advanced Settings button in the xavierwireless Wireless Network Properties window.
13. In the Advanced Settings window check the Specify Authentication Mode checkbox. Confirm user or computer authentication is selected. Click OK at the bottom of the Advanced Settings window.
14. Select OK at the xavierwireless Wireless Network Properties window.
15. Click Close at the Manually connect to a wireless network window.
16. Move the mouse cursor to the bottom right corner of the screen. Select the network icon found in the lower right.
17. Select “xavierwireless” from the displayed WiFi networks.
18. Click Connect. You should be greeted by a Network Authentication window.
21. Enter your Xavier username and password then click OK.
22. In a few seconds the status should change from "limited" to “Connected”.
24. Verify that you can browse to the internet by going to http://www.google.com.